Cables Made to Order, replacement cables for Exercise EquipmentRef: CC0233
We will make cables to your length. The picture shows the various end connections we have available.
Type "C" ends are no longer a suggested end by us. They do not hold up as well as type "A". If the customer request a type "C" he/she does so at their own risk.
We suggest only using type "A" as they last longer......To order a cable, call us at 1-800-235-8341 and specify the following: cable length, type of ends. (All cables are custom made, and may not be returned) Measurement must be from extreme length to extreme length including loop end or bolt end. Do not include the measurement of attachments such as clips "S" hooks etc.
***IMPORTANT - PLEASE READ BEFORE CALLING WITH MEASUREMENTS***
When measuring your cable, remember it is important to measure end to end. Do not include cable attachments such as "S" hooks or Carabiners. You are respondsible for the measurements, and cables may not be returned if you provide incorrect measurements. Each cable is custom made to your specific requirements.
A- Loop End
B- Weight Stack Bolt End ( 1/2 in or 3/8 in Bolts )
C- Bolt Loop End
D- Loop With Large Ball Stopper
E- Loop With Small Ball Stopper
F- Shank Ball End
G- Stud Bolt NO LONGER OFFERED
Most cables cost $42 - and Up plus $8 shipping and handling. You can purchase with a credit card, or a money order.
Click to Hear an Audio Description
|
 |
Cable or Pulley guards will fit most pulleys up to 4.5 in. Has adjustable slot. Keeps Cable on your pulley, reducing damage.
Price is each ( one ) metal guard ( does not include pulley )
|
|
Use this Rubber slide on Weight to adjustment your poundage ! Move up in 5 pound increments.
|
|
Adjust your lifts in 2.5 pound increments with this rubber adjustment shoe for your weight stack.
|
|
Keep those plates from breaking or keep the noise down, with these rubber plate separators.
|
|
Ring Selector Rod. 14 Plates plus the top plate. one inch shaft x 3/8 holes. The top "O bolt" is optional. Does not ship with this unit.
|
|
Ring Selector Rod. 20 Plates plus the top plate. one inch shaft with 3/8 in. holes.
|
|
Weight Selector Rod 25 holes, with one inch shaft and 3/8 in holes.
|
|
Ring Selector Rod. 30 Plates plus the top plate. One inch shaft and 3/8 in. holes.
|
|
Chrome Top Plate for your Home Gym. ( Approx 5 pounds ) Made for one inch shaft.
|
|
Change out some of those tens and replace them with 5's. Move up in five pounds increments. Size = 3.5 in W X 7 5/8 inches Long. Whole is 1 5/16th in. from end of plate to center of first whole. Each whole will accept 1 in. guide rod.Measurements are approximately.
|
|
Ten Pound Weight plates. Replace those broken plates with these 10 pounders.Size = 4 11/16 in W X 10 1/8 inches Long. Whole is 2 9/16th in. from end of plate to center of first whole. Each whole will accept 1 in. guide rod.Measurements are approximately.
|
|
Make that weight stack heavier with these 15 pounders.Size = 6 7/8 in W X 10 1/4 inches Long. Whole is 2 11/16th in. from end of plate to center of first whole. Each whole will accept 1 in. guide rod.Measurements are approximately.
|
|
Make that weight stack heavy by using these 20 pounders. If you have a twenty whole rod, then you can increase that stack to 20 x 20 = 400 pounds, without any lost of range of motion.Size = 8 3/4 in W X 10 3/16 inches Long. Whole is 2 9/16th in. from end of plate to center of first whole. Each whole will accept 1 in. guide rod. Measurements are approximately.
|
|
